Sync out.
Monday, May 27, 2013
[Pan Oceania] Shock Army - Regulars
Pan Oceania - Take Two!
After posting the photos of my Pan Oceania on our local forums, a recurring criticism I received was that the guns on my models were the same colour as the armour.
So, I picked up another silver metallic Formula P3 paint (Cold Steel) from my FLGS, and spent the better part of a Saturday repainting all the weapons on my Pan Oceania! I've taken a whole bunch of new photos, that I'll be putting up throughout the week.
![]() |
| A valid, and very constructive, criticism - they do look the same! |
Sync out.
Thursday, May 2, 2013
Infinity Terrain - Cheap and Easy
I think I've mentioned enough on this blog how important terrain was for Infinity, so I decided to make my own cheap'n'easy Infinity terrain. My goal was to make some cheap, easy and functional terrain for Infinity - that didn't look too much like kitchen waste glued together. The below terrain pieces cost me a grand total of $14 in materials, and only took me the better part of a morning to make.
I'm not exactly sure what each piece is. They aren't buildings (there aren't any doors or windows, or any indication models can go inside them), so I guess the 'structures' are some kind of fortified turrets or fire bases. The smaller structure one is some kind generator I guess. Again, I restate that my main objectives are cheap, easy, functional terrain pieces!
After Bandua Wargames released their official Infinity terrain last week, I got to thinking about the way that they store inside each other, and where I had seen something like that before. I remember visiting a $2 shop and seeing sets of gift boxes available. The ones pictured below come in a set of 3 boxes for $7. I bought two sets for a grand total of $14.
Now the reason that I bought two sets of boxes, was because each box in the set was a different height. So unless you wanted sloping walkways, you needed at least two buildings of equal height. Taking the lids of each of the smallest boxes, making each walkway was pretty straight forward:
![]() |
| And they all stack inside each other for easy storage! |
I'm not exactly sure what each piece is. They aren't buildings (there aren't any doors or windows, or any indication models can go inside them), so I guess the 'structures' are some kind of fortified turrets or fire bases. The smaller structure one is some kind generator I guess. Again, I restate that my main objectives are cheap, easy, functional terrain pieces!
How To
After Bandua Wargames released their official Infinity terrain last week, I got to thinking about the way that they store inside each other, and where I had seen something like that before. I remember visiting a $2 shop and seeing sets of gift boxes available. The ones pictured below come in a set of 3 boxes for $7. I bought two sets for a grand total of $14.
![]() |
| Set of 3 gift boxes |
![]() |
| They can fit inside each other! Handy :) |
Walkways
Now the reason that I bought two sets of boxes, was because each box in the set was a different height. So unless you wanted sloping walkways, you needed at least two buildings of equal height. Taking the lids of each of the smallest boxes, making each walkway was pretty straight forward:
![]() |
| Cut the ramps, making sure that you leave a bit of a corner on each side for strength on the railings |
![]() |
| Walkways, after four easy cuts |
![]() |
| Break the cardboard, so you hear a tear. this will allow the walkway ramp to bend closer to a right angle |
![]() |
| After you've broken each bend, strengthen the joins with sticky-tape on both the top and bottom |
![]() |
| Then the piece was just spray painted, and print-out paper details added |
Generators
![]() |
| Take the small box, and stick some foamcore to the sides! But make sure the foamcore isn't so thick as to prevent the box fitting inside the next biggest box in the set. |
![]() |
| Again, spray paint and stick some paper print-outs on there! |
Structures
![]() |
| Cut paddlepop sticks to the height of each of the box bases |
![]() |
| Turn the box base upside down, and glue the lid on top of it. Now glue your paddlepop sticks to the sides of the structure. |
Sync out.
Wednesday, May 1, 2013
Pan Oceania - Guarda de Assalto
My first little mech for Infinity! He's supposed to have an antennae up the top, but when I has holding the model in my hand, I had no idea how I was going to attach it. Green-stuff would have resulted in an ugly lumpy bond, and the antennae itself was too small to pin. Well, I think he looks fine without it.
Sync out.
Tuesday, April 30, 2013
Pan Oceania - Shock Army Regulars
And here are the Regulars that are part of the Pan Oceania Army Shock Army Starter Box. I hate painting skin tones, but I think these came out alright. I actually have more Regulars as part of my Shock Army, so more to come!
Sync out.
Wednesday, April 24, 2013
Pan Oceania - Shock Army
So, after painting finishing up my Pan Oceania Military Orders army, I decided to paint through another Infinity faction. I opted for another faction within Pan Oceania, and went with the Shock Army of Acontecimento.
Here are the first three models of the boxset painted up. I know I usually paint up the grunts of each box first, but I was already used to painting up knights and heavy armour troops of my Military Orders - so I kept the ball rolling!
Sync out.
Subscribe to:
Posts (Atom)

























